IXP110   1 Door System

The ImproX IXP110 Controller is a fully featured Controller that forms part of the IXP110 Software System. The IXP110 Controllers applications include access control (access of up to 900 users through a single door) and alarm control.

The IXP110 Controller is available in three models:

• IXP904-1-0-GB-XX: IXP110,
  Aluminium Cabinet, RS232
  connection to the Host PC.
• IXP905-1-0-GB-XX: IXP110,
  Aluminium Cabinet, USB connection
  to the Host PC (USB cable included).
• IXP906-1-0-GB-XX: IXP110,
  Aluminium Cabinet, EtherNet connection to the Host PC.

The following Antenna Readers are compatible with the IXP110 Controller and are suitable for most installations:

• ImproX (MMA) Mullion Antenna Reader.
• ImproX (MA) Micro Antenna Reader.
• ImproX (MHA) Metal Antenna Reader.
• ImproX (KMA) Mullion Keypad Antenna Reader.
• ImproX (KA) Keypad Antenna Reader.
• ImproX (KHA) Metal Keypad Antenna Reader.
• ImproX (RA) Rod Antenna Reader.
• ImproX (DPA) Door Entry Panel Antenna Reader.
• ImproX (CA) Conduit Antenna Reader.

Instead of using a mechanical key, the door is opened when a valid Tag is presented to the Antenna Reader. Advanced security features prevent the door latch being opened even if the wiring is tampered with, or if the Antenna Reader is substituted with another Antenna Reader.

For added security, the System can be programmed so that, in addition to presenting a Tag, a 4-digit Personal Identification Number (PIN-code) is also required to be entered via a Keypad Antenna Reader before access is allowed.

As a cost effective option, provided the System is programmed to accept it, a 5-digit Personal Access Code (PAC-code) can be used in place of a Tag.

Three Tagholder levels are provided for in the System: User (entry during specified time periods only), Supervisor (entry at all times) and Administrator (entry at all times, and may program the System).

The IXP110 System provides a variety of features, while keeping the system easy to use. Basic features are available using the Keypad Antenna Reader; advanced features are available by means of the PC Software program.

The Controller is enclosed in an Aluminium Cabinet; however, as the Cabinet is NOT waterproof, the Controller is intended for indoor use only. The Controller offers a single Status LED for the installer.

Features

Hardware Specific

• Installation friendly using a robust aluminium extrusion.
• Pluggable terminal blocks.
• Utilizes Quick Click Glands.
  Two Anti-tamper switches.
• Connection to up to two Antenna Readers per Controller.
• Supports all ImproX Antenna Readers (XTT901 – XTT909).
• In-field Firmware upgrades.
• Read/Write capability using the following Impro Tags: Slim Tags and Omega Tags (Read Only). WriTag 128 and WriTag 2048 (Read/Write).
• Reads selected Third-party Tags.
• Authorized Tagholders (Administrator or Supervisor) are able to arm and disarm a separate alarm panel by means of the Antenna Readers Keypad.
• Runs off AC power (16 V AC), charges a 12 V Battery, therefore no need for an external Power Supply.
• Supports 9 V DC to 24 V DC.
• Battery charging capabilities.

System specific

• Self contained system.
• Three user-tag levels comprising of: User, Supervisor and Administrator.
• A unique 4-digit PIN-code per Tagholder.
• Operates as a simple intrusion alarm, whereby a siren is activated when a door open sensor is triggered.
• A maximum of 900 Tagholders with a maximum of 950 transactions stored in the Transaction Buffer.
• Lost Tags can be voided from the System without having to change locks, or having any impact on other Tagholders.
• Supports Time Management Reporting.